Industrial buildings have to utilise piping systems to ensure that their workspaces and toilets can obtain their needed water supply. These systems are likewise installed so that wastewater can be transported out of these buildings.

The effectiveness of industrial piping systems can be determined by various factors. One of these factors is the materials used for the pipes. Pipes for industrial purposes should be durable enough to handle the volume of water they will be transporting in and out of the buildings. Another factor is their sealing. The absence of proper sealing will only lead to leak problems, which can be devastating for industrial buildings if left unresolved.

If you are currently managing an industrial building, your industrial piping systems should be sealed optimally with gaskets. Gaskets are seals that can fill the space between the mating surfaces of your piping systems. Here are some things you need to consider when choosing the best gaskets for your industrial piping systems.


One of the things you should consider when choosing gaskets for your industrial piping systems is their compatibility with various piping elements. Tons of materials can be used to produce and manufacture gaskets. And since you will be sealing your piping systems, you must only opt for gasket materials that are compatible with the media that flow through these systems.

When choosing your gasket materials, they should be inert to the effects of potable water and wastewater so they can retain great performance and long service life throughout the operations of both the gaskets and the pipes. Your gasket materials should likewise be compatible with the properties of your piping materials. Pairing the right gasket materials with your pipes ensures that the latter will not attain any cracks and fractures in the long run.


Another element to consider when choosing and selecting gaskets for your industrial piping systems is their lubrication. Gasket lubrication is necessary in some cases as it can help improve its sealing within a joint. Without proper lubrication, it would only promote damages and issues to your industrial piping systems and the gaskets themselves.

Physical Qualities

Your gaskets may be compatible with your pipes, but without considering their physical qualities, they might only end up causing some problems to your industrial piping systems. When selecting your gaskets, you must match their physical qualities to the demands of your piping systems. You must also maximise full-faced gaskets so they can fill the entire surface of the flange with holes. Your gaskets should likewise maximise a hardness of 55 to 80 durometer A so they can handle enough compression. Their thickness must also be at least 1/8. Inches.

Upon choosing the gaskets of your industrial piping systems, you must make sure that they will be installed properly and maintained regularly. Applying the right torque and tightening the bolt in the correct order make sure that even pressure will be applied to the gaskets. Doing these things can then prevent leaks and structural integrity issues.

To help you choose the perfect gaskets for your industrial piping systems, you can contact us at Gasketech. We are a manufacturer and supplier of gaskets and sealing washers, extrusions, and mouldings for all industries.

Manufacturers use different components to ensure that their machines, tools, and others will work optimally. One component that they use is gaskets.

Gaskets are mechanical sealing components that can fill the space between mating surfaces. Once installed, they can prevent liquid and other media from leaking from or into the joined components. They can also protect the same components from damages that may be caused by compression during their operations.

While many gaskets today are made from durable and long-lasting materials, they could still obtain issues that lead to their failure.

Common Gasket Failures

As mentioned earlier, gaskets tend to provide proper sealing to the components that can be found inside machines, tools, and other similar things. They can, however, fail as time passes. Some common failures and problems with gaskets are as follows.

Faulty gaskets can then be triggered by the overheating of components. Loss of pressure and power can also make gaskets fail. Contamination can likewise affect the qualities of the gaskets, especially if they are vulnerable to oil and other similar elements.

Installing Custom Gaskets 

Opting for custom gaskets instead of the standard ones can help resolve and even prevent common gasket failures. Custom gaskets can have attributes that can work with one’s needs and applications. These attributes include material thickness, load retention, compressibility, and gasket design. As gasket manufacturers understand the requirements of a specific application, they can suggest materials and designs that may work well with their intended use. 

Different materials can be used in generating custom gaskets. These materials include neoprene, EPDM, and silicone. The gaskets can then be processed with various cutting machines that may work either automatically or manually. 

Of course, custom gaskets can only be achieved if one would work with a reliable gasket manufacturer and supplier. This specific manufacturer and supplier should have the experience and skills in creating gaskets. They must also have all the tools necessary in manufacturing them. If you need access to custom gaskets, you can contact us at Gasketech.